add chat to your website

We will be closed to observe Memorial Day 5/28/2018. Orders will be processed on Tuesday

15' x 10' Straight Stretch Fabric Zip Stand

$1,399.00
•  Sets up in 20 minutes
•  Frame and fabric weigh 33 pounds
•  Includes frame, fabric, and soft carry case
 

Compatible file extensions to upload: .pdf, .png, .jpeg, .ai, .psd, .eps, .jpg

In stock
SKU
15'x10'zipstand1.25

For larger files, please use our File Upload after purchase. 

Details

• A true 15' wide by almost 10' high, this is a great stand for a trade show or event backdrop.  
• Actual Display Size: 180" Wide x 120" High x 1-1/4" Deep (feet 18"deep)
• Travels easy - Soft stand in case is only 8" x 8" x 24" (not including the fabric)
• Round frame tubes are 1-1/4" in dia and are more than adequate for this stand.
• Fabric is sewn like a pillowcase and simply slips over the frame and is attached under the frame with a zipper.
• The fabric is stretchy and when pulled tight eliminates all the wrinkles.
 

Set Up Time - 20min - 1 person,  less than 15 min with 2 people

This 15' x 10'  display wall can be set up by 1 person although 2 people is preferred.  Total set up time for 1 person is about 20 min.  Straight pole sections are bungeed together and attach to the corners.  Joints are all numbered, so just match the numbers and set up will be quick.  Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it.  Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)
 

Fabric material and printing process (Pillow Case Style, Zippered Displays)

•  These Zippered displays are printed using a dye sublimation process that creates stunning colors and actually dyes the fabric threads.  The dye sublimation process produces very high definition prints that last a long time.
•  The fabric used for this zip stand is a soft knit 5.0 osy polyester material that is crease resistant and has a slight stretch to it, which reduces wrinkles when fully stretched over the tube frame. 
•  FR Rating: NFPA-701 Certified  Fire Certificate
•  The soft look of the fabric makes your booth inviting and if you use it as a step and repeat (or media) backdrop you will not have any glare when taking photos.
•  Washable - on Cold and air dry
 

About the Display Frame

The frame is made of 1-1/4" dia aluminum tube.  Very lightweight at about 14lbs.  Breaks down into approx 2' sections which are bungee corded together for easy setup.  Sections snap together with snap pins.  No tools are needed to erect this frame and it would take 1 person less than 10 minutes to assemble.  All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.
 

Lights

We can supply optional LED lights that clamp onto the top of the frame.  You always want light on your display and the more the better.  This 10' frame can hold up to 4 lights across the top and I would recommend that many if you can.   More specs on the lights can be found in our lights section.
 

Hard Carry Case Option

The Small Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility.
more about the hard carry case
 

Shipping Sizes

 Hardware Only w/soft case - 35" x 12" x 10" 33lbs. (box size - 34x12x11.5)
 
Hardware, Fabric (10.5 lbs.), and shipping box - 34x12x11.5 43.5 lbs.
 

Shipping - Need it Faster?

We have an option to get your project to print faster than our normal turnaround.  How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.

Setup Instructions

Link for full  Installation Instructions

 

Assemble the frame - Less the feet

Pull the fabric over the frame and pull on the sides evenly. 
They may catch a bit on the tube joints, just pull the fabric out and over to continue.

Once the fabric is on the frame it is easiest to lay the frame down to zip the fabric under the bottom tube.

Zipping the fabric
Find the end where the zipper is to start.
Grab both sides of the fabric and pull around the bottom tube of the frame. This stretches the fabric and makes it easier to set the zipper.

Start the zipper and zip it across the bottom of the stand, pulling the fabric down if need be.

Feet
Add the feet to your Zip Stand and stand it up.

Adjustments:
These tube frames can be easily adjusted if there is a twist to the frame after the fabric is on. Simply twist the frame until it is flat. The tension of the fabric will hold it where you set it.

Design Templates

15' x 10' Stretch Fabric Zip Stand Display Wall 1-1/4" Tube

• Layout should be 179" wide x 117.5" high with an additional 1" image bleed on all sides
• Press PDF or EPS files are preferred, with text converted to outlines or curves.
• CMYK color space is best, RGB works ok.
• Image resolution should be approx 125dpi at final size for best printing.
• Large files should be uploaded after the order is placed using the "File Upload" tab at the top of the website.
 
15' x 10'  Straight Zip Stand Template 1/2 size
 

How to order with multiple or large files

• Place your order for the total number of stretch fabric display stands you want and check out.
• After you place your order, go to our "File Upload" tab located on the top of the home page. There you can upload up to 6 files at a time, if you have more than 6 , simply send another set.
• We connect your order and your files by the email you use on your order and the file upload.  If we have any questions we will let you know.
• We will be in contact with you on all orders before we go to print.

Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account