add chat to your website

20' x 8' Straight Stretch Fabric Zip Stand

$1,192.00
•  Sets up in 20 minutes
•  Frame and fabric weigh 25 pounds
•  Includes frame, fabric, and soft carry case
 

Compatible file extensions to upload: pdf, png, jpeg, ai, psd, eps, jpg

In stock
SKU
20'x8'zipstand1.25

For larger files, please use our File Upload after purchase. 

Details

• A true 20' wide by almost 8' high, this is a great stand for a trade show or event backdrop.  
• Actual Display Size: 240" Wide x 96" High x 1-1/4" Deep (feet 18" deep)
• Travels easy - Frame and fabric are in separate boxes
• Round frame tubes are 1-1/4" in dia and are more than adequate for this stand.
• Fabric is sewn like a pillowcase and simply slips over the frame and is attached under the frame with 2 zippers.
• The fabric is stretchy and when pulled tight eliminates all the wrinkles.

Set Up Time - 20 min - 1 person,  about 15 min with 2 people

This 20' x 8' display wall can be set up by 1 person although 2 people is preferred.  Total set up time for 1 person is about 20 min.  Straight pole sections are bungeed together and attach to the corners.  Joints are all numbered, so just match the numbers and set up will be quick.  Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it.  Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)

About the Fabric Used in this Tube Display Frame

Your graphic will be printed on a lightweight polyester stretch fabric using a dye sublimation process in which the threads of the fabric are dyed during the printing process. 400-degree heat is used on the fabric and ink in order to dye the threads giving you a vibrant, full color, long lasting print.

Material: 100% PES

Weight: 190 g/m²

B1 Fire Rating: Fire Certificate

To clean your display fabric we recommend washing on a cold water, gentle cycle setting with a color friendly detergent. You can either air dry or tumble dry on a low-temperature setting in the dryer. If your fabric gets wrinkled or creased from folding it's an easy fix. Generally, the stretch fabric eliminates any creases when pulled taught over the frame. The fabric can also be steamed to look good as new. 

About the Display Frame

The frame is made of 1-1/4" dia aluminum tube.  Very lightweight at about 10lbs.  Breaks down into approx 2' sections which are bungee corded together for easy setup.  Sections snap together with snap pins.  No tools are needed to erect this frame and it would take 1 person less than 15 minutes to assemble.  All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.

About the Lights

Lights are 18w LEDs on an arm that sticks out from the frame.  The lights are attached with a "C" type aluminum clamp on the bar of the frame.  Typically you would want at least 4 lights on this 20' frame, 6 is better and 8 will really get you noticed.  This frame type is difficult to add lights to both sides if you have a double-sided graphic since there is really no place to run the wires along the top of the display.
more about the lights

About the Hard Shipping Case Option

more about the hard carry case

Shipping Sizes

 Hardware Only w/soft case - 38" x 14" x 11" 25lbs. (box size - 37.5x12x11.5)

 Hardware, Fabric (11.2 lbs.), and shipping box - 37.5x12x11.5 36.2 lbs.

Shipping - Need it Faster?
We have an option to get your project to print faster than our normal turnaround.  How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.

Setup Instructions

Link for full Installation Instructions

Assemble the frame - Less the feet.

Pull the fabric over the frame and pull on the sides evenly. They may catch a bit on the tube joints, just pull the fabric out and over to continue.

Once the fabric is on the frame it is easiest to lay the frame down to zip the fabric under the bottom tube.

Zipping the fabric

Find the end where the zipper is to start.

Grab both sides of the fabric and pull around the bottom tube of the frame. This stretches the fabric and makes it easier to set the zipper.

Start the zipper and zip it across the bottom of the stand, pulling the fabric down if need be.

Feet

Add the feet to your Zip Stand and stand it up.

Adjustments:

These tube frames can be easily adjusted if there is a twist to the frame after the fabric is on. Simply twist the frame until it is flat. The tension of the fabric will hold it where you set it.

Design Templates

20' x 8' Stretch Fabric Zip Stand Display Wall 1-1/4" Tube

• Layout should be 239.5" wide x  93.5" high with an additional 1" image bleed on top and bottom, and 2" bleed on sides

• Press PDF or EPS files are preferred, with text converted to outlines or curves.

• CMYK color space is best, RGB works ok.

• Image resolution should be approx 125dpi at final size for best printing.

• Large files should be uploaded after the order is placed using the "File Upload" tab at the top of the website.

20'x8' zip stand template

Half Size Template - to save this file to your computer, simply right click and "save link as".

How to order with multiple or large files

• Place your order for the total number of stretch fabric display stands you want and check out.
• After you place your order, go to our "File Upload" tab located on the top of the home page. There you can upload up to 6 files at a time, if you have more than 6 , simply send another set.
• We connect your order and your files by the email you use on your order and the file upload.  If we have any questions we will let you know.
• We will be in contact with you on all orders before we go to print.

Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account