• 4' wide by 96" high, this is a great stand for a trade show or event backdrop. • Actual Display Size: 48" Wide x 96" High x 1-1/4" Deep (feet 18"deep).• Travels easy - soft stand in soft carry case is only 32"x12"x4" (not including the fabric).• Round frame tubes are 1-1/4" in dia.• Fabric is sewn like a pillowcase and simply slips over the frame and is attached under the frame with a zipper.• The fabric is stretchy and when pulled tight eliminates all the wrinkles.• Display Size: 48" Wide x 96" High• Fabric Slides over the frame, zippers on bottom.• No Tools Required• Frame Weighs only 8lbs, Fabric about 8lbs• B1 Fire Rated Printed Stretch Fabric
Set Up Time - 15min - 1 person, less than 10 min with 2 people
This 4' x 8' display wall can be set up by 1 person although 2 people is preferred. Total set up time for 1 person is about 15 min. Straight pole sections are bungeed together and attach to the corners. Joints are all numbered, so just match the numbers and set up will be quick. Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it. Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)
Fabric material and printing process (Pillow Case Style, Zippered Displays)
• These Zippered displays are printed using a dye sublimation process that creates stunning colors and actually dyes the fabric threads. The dye sublimation process produces very high definition prints that last a long time.• The fabric used for this zip stand is a soft knit 5.0 osy polyester material that is crease resistant and has a slight stretch to it, which reduces wrinkles when fully stretched over the tube frame. • FR Rating: NFPA-701 Certified Fire Certificate• The soft look of the fabric makes your booth inviting and if you use it as a step and repeat (or media) backdrop you will not have any glare when taking photos.• Washable - on Cold and air dry
About the Display Frame
The frame is made of 1-1/4" dia aluminum tube. Very lightweight at about 10lbs. Breaks down into approx 2' sections which are bungee corded together for easy setup. Sections snap together with snap pins. No tools are needed to erect this frame and it would take 1 person less than 10 minutes to assemble. All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.
About the Lights
Lights are 18w LEDs on an arm that sticks out from the frame. The lights are attached with a clamp on the bar of the frame. Typically, you would want at least 2 lights on this 4' frame.. This frame type is difficult to add lights to both sides, if you have a double sided graphic, since there is really no place to run the wires along the top of the display.
more about the lights
About the Hard Carry Case Option
The Small Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility.
more about the hard carry case
Hardware Only w/soft case - 35" x 8" x 7" 14lbs. (box size - 34.5x13x6.5)
Hardware, Fabric (2.24 lbs.), and shipping box - 34.5x13x6.5 16.24 lbs.
Shipping - Need it Faster?
We have an option to get your project to print faster than our normal turnaround. How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.