14' Eagle Feather Banner (Right reading both sides)

Grab Attention Fast with this 14' waving advertisement.
• 14' High from Ground Level
• Full Color Dye Sub printing included
• Printed 2 sides so image is right reading from both sides
• Standard Turn around is 2-4 business days
• Spike Base Included
• Wind Speed rating of 18-23 mph (1Year Warranty on the hardware)
In a rush?  Need it soon?
• Choose the Next Business Day Rush
• Get your order in and approved by 12pm EST for turnaround to be completed Next Business Day.
• Ensure you choose the proper shipping method for you to get your order in time!

Compatible file extensions to upload: pdf, png, jpeg, ai, psd, eps, jpg

In stock

For larger files, please use our File Upload after purchase. 


Wave your message in front of your customers with this giant feather banner.  

Easy setup and take down.  Put the spike base in the ground and just slip the banner over.  Take it in at night if you need by just pulling it off.

This 14ft Eagle Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 14ft banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation.

Printed in 2 pieces with a block out layer in between, allows both sides to be right reading.  A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. 

Package includes:
• Pole
• Spike Base
• Printed Banner (Double-Sided, which means both sides are printed separately and the text on both sides would be right reading)
• Nylon Bag

X-Base for indoor or flat surface use.

Download the assembly directions



Setup Instructions

Eagle Flag Instructions

Falcon Flag - Quick Instructions

Step 1:

Assemble the first 2 tapered rods, starting with the thinnest rod and then adding the next size, making sure they fit snugly together.

Step 2:

Insert these 2 rods into the sleeve on the side of the banners.

Step 3:

Continue to add the last thickest rod until the top rod has been pushed all the way to the end of the sleeve. Tip: It is important to ensure the rods are positioned right to the end of the sleeve.

Step 4:

Bring the bungee string through the grommets. Each end of the bungee will have their own section which will be inserted and pulled through the slotted part attached to the bottom of the pole.

Falcon Flag Base

Spike Base

Tap longer pole into the ground. Be careful not to tap & damage the shorter-thicker swivel spindle. Insert the bottom of the pole of the banner into the shorterthicker swivel spindle.

Cross Base (Option)

The collapsible hard ground cross base weighs about 4 lbs and is great for use indoor and outdoor.

Water Bag (Option)

To give added stability outdoors a water bag is option for the cross base. The water bag weighs up to about 18 lbs (9 kg) when full and we highly recommend its use outdoors.

Design Templates

Download the Design Template below and import it into your design program for the best layout.  Both sides need to be set up for this flag bannner.

XS Double Sided Falcon Template

Large Double Sided Falcon Template

Need Help with designing?  Because of the curved nature of these flags it is virtually impossible to design these in any thing other than a good layout program.  If you have a logo that you are looking to place on the flag, just send it to us and we will do the work for free.  

If you have a full design you are looking for we can do that also but there may be small design fee.

Have you own file ready?  Simply upload it with your order or use the "File Upload" tab at the top of the website.

Design Specs:

If you are preparing a file for print please look over the specifications below.  If you have any questions please feel free to give us a call or send us an email.
• Design layout should be as in the PDF template file at top of page
• PDF files are preferred.
• No bleed is required
• RGB or CMYK color space work equally well
• Image resolution should be approx 150dpi at final size for best printing.
• Large files should be uploaded after the order is placed using the "File Upload" tab at the top of the website.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account