14 ft Eagle Feather Banner
Wave your message in front of your customers with this giant feather banner.Easy setup and take down. Put the spike base in the ground and just slip the banner over. Take it in at night if you need by just pulling it off.
This 14ft Eagle Flag is intended for display outdoors using the spike base, but can be used inside using the X-base. The X-base is also a great option for placing this 13ft banner stand on concrete or other hard surfaces. The banner design is customized to your graphic artwork, and is printed on polyester mesh by the process of dye sublimation.
Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim is sewn on the edge of the graphic (pole-side), leaving a pocket for the pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base.
• Spike Base
• Printed Banner (Single-Sided, which means both sides are printed but the ink is dyed through from one side, making the back side a mirror image of the front. Text will be reversed on the back side)
• Nylon Bag
X-Base (upgrade; use drop down)
Download the Design Template below and import it into your design program for the best layout.
Need Help with designing? Because of the curved nature of these flags it is virtually impossible to design these in any thing other than a good layout program. If you have a logo that you are looking to place on the flag, just send it to us and we will do the work for free.
If you have a full design you are looking for we can do that also but there may be small design fee.
Have you own file ready? Simply upload it with your order or use the "File Upload" tab at the top of the website.