PVC Board Printed Signs 11"x14"
- Buy 2 for $12.60 each and save 10%
- Buy 5 for $7.50 each and save 46%
- Buy 10 for $7.13 each and save 49%
- Buy 20 for $6.75 each and save 52%
- Buy 50 for $5.63 each and save 60%
- Buy 100 for $4.88 each and save 65%
- Buy 500 for $4.13 each and save 71%
- 1/8" Smooth PVC Board (3 mm)
- 11"x14" size (vertical or horizontal)
- Waterproof and Durable
- Custom Printed in Full Color directly to PVC board
- Same day print and ship if proof is approved before 2pm EST for most orders
- Design online, or upload files for these 11x14 signs
Design Online Templates
Choose portrait or landscape orientation above to open the design online page in the correct orientation.
Design Options: Choose an editable template below to use or click on “Design it Yourself” to start from scratch
Design Specs for 11"x14" Custom PVC Board Sign
Download this template by right clicking and "save link as.." to your computer
Design layout should be at full size either:
- 11" wide x 14" high
- 11" high x 14" wide
File types accepted:
- PDF - Preferred file type
Color profiles accepted:
- Mixed colors
- Pantone Colors*
- Pantone colors can be used. Pantone colors are converted to a cmyk mix for printing so colors may vary.
- Should all be converted to an image before sending in.
- Should be approx 150dpi at final size for best printing.
How to order with multiple or large files
- Place your order for the total number of pop ups you want and check out.
- After you place your order, go to our "File Upload" tab located on the top left side of the home page. There you can upload up to 6 files at a time, if you have more than 6 , simply send another set.
- We connect your order and your files by the email you use on your order and the file upload. If we have any questions we will let you know.
- You will receive a proof that requires approval by you before anything goes to print.
Placing your order online for the 11"x14" PVC board print(s)
Choose if you want to add an easel back to your sign
Choose if you want to add a lamination to your sign
- Matte Lamination
- Gloss Lamination
- Dry Erase Lamination
- Choose if you want it to be double sided printing.
Do you have your own print ready file?
- Upload the file with the upload button
- If you have large or multiple files, use the "File Upload" link after the order is placed
Do you want to use our Design Online feature?
- Choose the correct orientation
- Choose a pre-made editable template below
- Choose to start from scratch by simply clicking on "Design it Yourself"
Order is placed: We will email you an order confirmation and your customer representative will be in touch during normal business hours.
Here is the next Steps:
- Our graphics department will send you a proof via email
- All proofs will need to be approved by you before printing
- Once approved the order will move to production where printing will start
- When printing is complete your order will be boxed up and prepared for shipping
- Your order will be picked up by FedEx at the end of the business day. We ship Monday - Friday, with the exception of holidays.
- When your order is scanned in by Fedex you will receive an email from us with the tracking and expected delivery date.
If you have any questions we are available:
Monday - Friday, with the exception of holidays
8:30am - 5pm EST
Care & Use of the 11"x14" PVC Board Sign
PVC signs are made of compressed foam material, the high-quality signs have a solid plastic core with a smooth finish. These signs are great for short-term outdoor or long-term indoor use.
Cleaning your PVC signs
- Since PVC material is waterproof, you can wipe down your signs with a dry or damp cloth without damaging the board or print.
- Don't use hard chemicals as it could ruin the ink or lamination.
Handle with care outdoors
- PVC is a durable plastic and is great for outdoors, however, it can damage if left in extreme heat or cold for extended periods of time by cracking or warping. If it's extreme hot or cold outside, we recommend bringing your PVC sign indoors.
Don't leave PVC signs in vehicles
- Vehicles can get extremely hot even if it's feels cool outside. Due to the high temperatures in vehicles, it could ruin your sign by causing it to wrap.
Uses of PVC Board Signs
Custom Printed Smooth PVC Signs are great, due to the smooth finish and solid core it can be used for a variety of things.
- Lectures and Presentations
- Name plates and tags
- Retail Store Signage
- Menu Boards
- Directional Signage
- Office Decor
Easel Stand Step:
- If you purchased a easel back then the easel will already be attached to the back of your sign when you receive it. Simply fold out the easel wing and lock it in to place. Now you can place your Foam Board Sign on any flat surface!
Mounted prints to wall (only for 1 sided printing):
- Since PVC boards are light weight it's pretty easy to mount them to any smooth surface wall. You can easily use double sided stick tape on the back of the sign to adhere it to the wall, Command Damage-Free Hanging Strips also work great.
- Reference the sign holder's manufacturer directions to ensure proper installation of the sign.
What are PVC boards made of?
- Our custom PVC signs are made of compressed foam material, the same material as your PVC plumbing pipes is made of at home. The PVC material is slightly flexible, smooth, rigid, and waterproof.
How long can I use my PVC Board Sign?
- Smooth PVC board Signs are great for short-term outdoor and long-term indoor use. With proper care of your custom printed PVC signs, they can last you many years.
Is PVC board durable?
- PVC board signs are very durable. They have a solid plastic core with a smooth surface, they won't damage as easily as Foam Board Signs, however, they can get damaged if dropped or scratched.
Can I use my Foam Board Sign outside?
- You can use your PVC sign outside. It's waterproof and we use UV inks, they are great for short-term outdoor use. PVC boards are susceptible to extreme heat and cold and we recommend bringing your signs inside if the temperatures are extreme.
I would like a different size than the 11"x14"?
- We can cut down the sign into any size, simply let us know in the comments section what the final size of the sign you would like. We'll confirm the custom size while in the proofing stage.
Can I custom cut or die cut my PVC Board Sign?
- Yes! We the best die cutting machinery you can get, and we have the ability to do most custom die cut projects. Here's how you can set up the cutlines. Please contact us about your custom cut signs 888-319-8184 prior to placing the order.
Should I laminate my PVC Board Print?
- You can laminate your PVC Board Sign; the lamination applies perfectly to the smooth surface of the PVC material. The PVC material itself has a matte appearance naturally.
- Going for more of a "photo like" look, choose gloss lamination.
- Want a matte (not glossy) finish, choose matte lamination.
- Want to write on it, wipe it off and reuse, choose dry erase lamination.
Will the dry erase markers stain the dry erase lamination?
- Since our dry erase lamination is high quality most dry erase, wet erase and liquid chalk markers should wipe right off easily without leaving any stains. We highly recommend wiping off any marker after using it, if the marker is left on it for a prolonged period of time it could stain the lamination. If you happen to get any staining, you can try to use as small amount of isopropyl alcohol to wipe the lamination.
Is the graphic mounted to the PVC Board Sign?
- No, we print directly to the PVC board material using high quality UV inks. Mounted prints are when the graphic is printed on a sheet of paper or vinyl then it's mounted onto the PVC material with an adhesive. In our experience printing direct to material produces just as high-quality results as custom foam board mounting.
Will my graphic peel away over time?
- Since we print direct to material none of the graphic will peel off the board unlike mounted prints.
I ordered an easel back but decided I don't want to use it. What do I do?
- The easel back comes already adhered to the back of your sign when you receive it, unfortunately, you won't be able to remove it without damaging the back of the sign, however, the easel back is so thin you can simply not fold it out.
Can I make my sign double sided?
- Yes, we can print on both sides of the foam board material. Choose double sided printing in the drop down.
How many colors or details can I use in my artwork, will it cost extra?
- You can use any number of colors or any amount of detail in your artwork without incurring any additional fees. We print our Foam Board Signs in full color and no matter how many colors or how detailed the artwork is, it won't affect the cost of the sign.
What color profile should I use in my artwork?
- We accept CMYK, RGB, Mixed colors and Pantone colors. We use a 4-color process, and each color profile will be converted to meet the original coloring as closely as possible.
I need my PVC Board Sign Quickly!
- Great, we specialize in quick turnarounds times! For most orders we can print and ship the same day if the proof is approved by 2pm EST. We also offer rush shipping in the check out if you need quick shipping.
When will I get a proof?
- Typically, you'll receive a proof via email from our graphics department within 1-2 hours of placing the order, if the order is placed during regular business hours of 8:30am - 5pm EST, Monday - Friday, with the exception of holidays. If you place your order during off hours/days, you'll receive a proof 1-2 hours from the time we re-open.
I don't have a print ready file or software to set up artwork, how can I get artwork set up?
- We have a very user-friendly design online program; anyone can use it and it's free for you to use! You can pick any of the editable templates we have set up or you can start from scratch. It has lots of options such as adding text, images, colors and even logos, the possibilities are endless! Make sure to create an account and save your designs for future use!
I realized I sent the wrong file when I received the proof, what do I do?
- No worries, this is why we send proofs! If you realized something is wrong in your artwork or sent the wrong file, simply respond to the graphics proof email, and let them know if you are sending a new file or have changes to your design online artwork. Our graphics team will always send you updated proofs, and nothing goes to print without your approval.
I approved of the proof then realized it was wrong, what do I do?
- We work fast over here, once the proof is approved it moves to production quickly. If you realize the proof was wrong after approving contact us as soon as possible. We can try to holt production if your order has not started to print yet. Once it starts printing it will be hard to pull it back at that point so the sooner you can let us know the better chances, we have to stop it.
I approved of my proof after 2:00pm EST will it still go out same day?
- If you have a rush order and the proof is approved after 2pm EST please let your customer representative know right away. We will make every effort to try and get your order out same day, however, it does depend on our production department's workload, and we cannot guarantee it will go out the same day if the proofs are approved after 2pm EST.