A removable, adhesive fabric that may be mounted to any surface and repositioned countless times. Will retain its adhesion and leaves no residue. Has a unique coating which is quick drying and water resistant. It provides superb quality, color gamut and resolution with solvent, eco-solvent, UV and Latex inks. Designed with unique opaque properties which prevents translucency problems associated with comparable products. Available in widths from 42” – 60”.
Common applications for FabriTac include wall graphics/murals, ceiling graphics, window graphics, menu board displays, POP/POS, Tradeshow graphics and decals. FabriTac’s opaque properties will help hide dark colors and imperfections on the application surfaces. The repositionable fabric does not rip, wrinkle, shrink or curl; which allows for endless application possibilities indoors and outdoors.
Prepare the Surface Before Applying FabriTac Before applying FabriTac, it is important to ensure that the surface is clean and dry. Clean the surface by using a warm, damp cloth on the surface and allow it to dry completely. It is important to ensure that all previous cleaning products are no longer present on the surface. If FabriTac is being applied to a painted wall, it is recommended that the wall is primed to ensure that the paint will not peel off the wall. Applying FabriTac it to the Surface To apply FabriTac, start at the top of the image to be applied and pull down approximately four to six inches of the backer and crease it. Apply the exposed adhesive to the desired surface slowly to avoid air bubbles. Once the beginning segment is level and in the proper position, continue applying the image in four to six inch increments. For larger graphics, it may be helpful to have multiple people apply the graphic. It is suggested that one person helps pull and crease the backer while another slowly works on adhering the image. If air bubbles or wrinkles appear after applying segments, peel the desired area back and gently reapply with a soft, felt-sided squeegee to remove bubbles. Note that the installer should not press too hard with the squeegee as this may damage the image. It is recommended to squeegee at a 45 degree angle with overlapping, firm strokes. An air release tool may be used to pop stubborn air pockets. Outdoor FabriTac Applications FabriTac’s water resistant coating allows the media to be used on outdoor surfaces as it breathes well on contracting or expanding surfaces with no peeling or curling. Similar to many outdoor sign applications, it is important to note that the material will hold up against the elements, however, when the inks are exposed to continued sun and rain, they may begin to fade.
For outdoor applications, FabriTac will last up to a year. *For safety purposes, FabriTac is not recommended for car windows. Removal of FabriTac When FabriTac is applied to a painted wall, it is recommended that the wall be primed to ensure that paint will not peel off the wall. The use of a blow dryer may help to soften the adhesive for easy removal from questionable surfaces like painted walls. We do not advise installation of FabriTac over untreated dry wall or drywall that has not been primed. There may be some peeling of the drywall upon removal of the FabriTac material. On any surface, we suggest removing FabriTac slowly, at a 180 degree angle (pulling straight back against the material versus up) to minimize the tension against the surface from which FabriTac is being removed. Ultraflex Systems Inc. 1578 Sussex Turnpike, Bldg 4 Randolph, NJ 07869 P: (973)627-8608 F: (973)627-8506 Toll Free: (800)368-7858 Ultraflex Europe Limited 1 Hardwick Rd Industrial Park Great Gransden, Bedfordshire UK SG19 3BJ P: 01767 677100 website: www.ultraflexeurope.com www.ultrafleXX.com Ultraflex México Azafrán 112, Granjas México Iztacalco C.P. 08400 México D. F. P: (55) 3182 3632, (55) 3182 3859 website: www.ultraflex.com.mx Ultraflex Guadalajara
Send us your file and wall size you are trying to cover and we can let you know a finished price as well as if your file resolution is able to enlarge to that size.
"File Upload" tab located on the top of the home page. There you can upload up to 6 files at a time, if you have more than 6 , simply send another set.
CHOOSE ALMOST ANY SPOT TO SHOW YOUR PROMOTIONS!
Pick a smooth, dry and clean surface –
When placing your self adhesive textile wallpaper on a standard painted wall, make sure the wall has been previously primed prior to painting (otherwise the paint may come off). If you place your wallpaper on a pebbly, textured surface that has used eggshell paint or a very porous surface (i.e. brick, cement walls, Stucco), you may receive poor results, although it has worked in some cases on newly painted surfaces. Make sure you allow 30 days for out gassing to prevent bubbling. We also suggest avoiding placement above fireplaces.
CLEAN IT BEFORE YOU STICK IT
Use a warm, damp cloth or sponge to clean the wall surface or window and allow it to completely dry. Make sure all previous cleaning solutions are completely gone. You can remove and replace the self adhesive textile wallpaper multiple times; however, once the adhesive collects too much dust, dirt or fibers it will become less effective and may not stick as well to your surface.
PEEL AND STICK IT
Depending on the size of your wallpaper, it may be helpful to have two people install it. Try not to let the adhesive come together, or let it fold up against itself. It’s okay if it does, you can separate it by carefully pulling it apart and you may want two people to do this on larger images. Start at the top of your Image and pull down approximately 4-6” of the backer and crease the back of the backer. Simply apply the 4-6” of exposed adhesive area to your chosen location. It can be repositioned many times. Once your square then continue to slowly pull the backer downward in 4-6” increments, smoothing the as you go. Depending on the size, it may be helpful if one person pulls down the backer, while the other smooth’s the image on the surface. You can use a plastic dry wall knife (like 6”-8”) to smooth out. If there are any bubbles or wrinkles, you can lightly press or smooth them out, or just peel back that area and re-apply. Please Note: Pressing too hard will not damage the wallpaper; however, it may cause your hands to gather ink (due to the natural oils on your hands), and could transfer from your hands onto another surface.
If a bubble re-appears over the next day or two, pressing and lightly rubbing can remove it. This can happen occasionally if oil, dirt, or dust is on your surface. You may also use a pin to pop the bubble, and then smooth it out with your fingers in a circular motion. In the very rare instance that it keeps re-appearing, you may want to move your wallpaper to another area as there is something wrong with this surface.
All shipping options are available in the cart (before you need to input any information about billing). Our site automatically calculates your shipping charges based on your zip code.
We ship via UPS and FedEx Monday through Friday with the exception of holidays. (FedEx ground home delivers on Sat instead of Monday)
Shipping days are counted by weekdays (no weekends or holidays) and the day count starts on the day following the ship day. So if you need a check by Monday and you order on Friday, you will need to choose "Overnight" delivery. We can assist you on choosing what shipping option would be right for you to make it to meet your deadline. Use the chat on the left hand side of the page to ask us for advice.
Ground shipping is the cheapest shipping that you can choose. Some of our items are large and when you use anything but ground ship the costs go way up because they are then measured by dimensional weight instead of the actual weight by UPS.
Below is a chart for UPS and FedEx Ground shipping. 3 Day - Next Day - 2nd Day options also available in cart.
FedEx Ground to a HOME that would be scheduled for monday delivery based on week days will be delivered on Sat.
All customers will receive a tracking number once their check has shipped.
Once your check is shipped you will be able to follow your big check at ups.com with the tracking number provided in an e-mail. If you have not received a tracking number confirmation by 5:00pm on the day you expect to ship, then please contact us at email@example.com
We currently ship to Canada and the UK.
For all international transactions, the product shall be sold on a delivered, insurance paid, brokerage fee paid basis - duty, taxes, VAT, or any other charges to be paid by the purchaser. BlueWavePrinting & BigCheckStore.com assumes no responsibility for charges attendant to Customs clearance in the country of delivery, customs duty, VAT, or any other charges or taxes within the country designated for delivery by the purchaser. Title and risk of loss shall pass to the purchaser upon delivery to the port designated by the purchaser and prior to Customs clearance.
Risk of loss of the products shall remain with User after delivery of the goods to the User and during the return of any unwanted goods by User to BlueWavePrinting & BigCheckStore.com.