Combination of 3'x8'-15'x8'-3'x8' Tension Fabric Tube Displays (total of 21' wide)
• Actual Display Size: 252" Wide x 96" High.
• Round frame tubes are 1-1/4" in dia and are more than adequate for this stand.
• Fabric is sewn like a pillowcase and simply slips over the frame and is attached under the frame with a zipper.
• The fabric is stretchy and when pulled tight eliminates all the wrinkles.
• Combines the following: 2 - 36" x 96" Stands and 1 - 180" x 96" Stand. Sides can be tilted slightly in, to give more depth to the backdrop.
Set Up Time - 25min - 1 person, less than 15 min with 2 people
Zip Combos can be set up by 1 person although 2 people is preferred. Total set up time for 1 person is about 25 min. Straight pole sections are bungeed together and attach to the corners. Joints are all numbered, so just match the numbers and set up will be quick. Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it. Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down).
Fabric material and printing process (Pillow Case Style, Zippered Displays)
• These Zippered displays are printed using a dye sublimation process that creates stunning colors and actually dyes the fabric threads. The dye sublimation process produces very high definition prints that last a long time.
• The fabric used for this zip stand is a soft knit 5.0 osy polyester material that is crease resistant and has a slight stretch to it, which reduces wrinkles when fully stretched over the tube frame.
• The soft look of the fabric makes your booth inviting and if you use it as a step and repeat (or media) backdrop you will not have any glare when taking photos.
• Washable - on Cold and air dry.
About the Display Frame
The frame is made of 1-1/4" dia aluminum tube. Breaks down into approx 30" sections which are bungee corded together for easy set up. Sections snap together with snap pins. No tools are needed to erect this frame (except an allen wrench for the feet). All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.
We can supply optional LED lights that clamp onto the top of the frame. You always want light on your display and the more the better. This frame can hold up to 6 lights across the top and I would recommend that many if you can. More specs on the lights can be found in our lights section.
Hard Shipping Case Options for this item
Large Case 6 fits - 2 - 3'x8', 1 - 15'x8' frames & fabric with soft carry cases, and 6 lights.
3' x 8' - 35" x 8" x 7" 15.18 lbs. (X2) shipping box - 34.5" x 12" x 7.5" (X2)
15' x 8' - 35" x 12" x 10" 30.9 lbs. shipping box - 34" x 12" x 11.5"
Total Weight: 61.26 lbs.
Shipping - Need it Faster?
We have an option to get your project to print faster than our normal turnaround. How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.
Zip Combos Assembly
This video shows how to properly assemble a zip combo stand. There are a variety of combinations and endless choices. Most combinations have 2 smaller zip stands that are placed on the sides and 1 larger zip stand that is placed in the middle.
Step One: Layout your zip frame pieces on a large flat surface. (Preferably the floor, make sure there are no extra items lying around.) Start with assembling the middle zip stand.
Step Two: Assemble the small joint piece. This attaches to the zip feet and allows the ends of the zip frames to slide in next to one another smoothly.
Step Three: Continue the building process. (Attaching zip feet to the poles, rest of the frame, etc.)
Step Four: Have 2 people slip the fabric over the completed assembled zip frame. Then, zipper up the bottom.
Step Five: Have 2 people (or the same ones) assemble the smaller zip stands. (Frame, feet, and fabric assembly.)
Step Six: Slide the smaller zip stands into the joint pieces. (These are placed on the sides of the middle zip stand.)
Pull the fabric over the frame and pull on the sides evenly.
They may catch a bit on the tube joints, just pull the fabric out and over to continue. Once the fabric is on the frame it is easiest to lay the frame down to zip the fabric under the bottom tube.
Zipping the fabric
Find the end where the zipper is to start.
Grab both sides of the fabric and pull around the bottom tube of the frame. This stretches the fabric and makes it easier to set the zipper.
Start the zipper and zip it across the bottom of the stand, pulling the fabric down if need be.
Add the feet to your Zip Stand and stand it up.
Adjustments: These tube frames can be easily adjusted if there is a twist to the frame after the fabric is on. Simply twist the frame until it is flat. The tension of the fabric will hold it where you set it.
All shipping options are available in the cart (before you need to input any information about billing). Our site automatically calculates your shipping charges based on your zip code.
We ship via UPS and FedEx Monday through Friday with the exception of holidays. (FedEx ground home delivers on Sat instead of Monday)
Shipping days are counted by weekdays (no weekends or holidays) and the day count starts on the day following the ship day. So if you need a check by Monday and you order on Friday, you will need to choose "Overnight" delivery. We can assist you on choosing what shipping option would be right for you to make it to meet your deadline. Use the chat on the left hand side of the page to ask us for advice.
Ground shipping is the cheapest shipping that you can choose. Some of our items are large and when you use anything but ground ship the costs go way up because they are then measured by dimensional weight instead of the actual weight by UPS.
Below is a chart for UPS and FedEx Ground shipping. 3 Day - Next Day - 2nd Day options also available in cart.
FedEx Ground to a HOME that would be scheduled for monday delivery based on week days will be delivered on Sat.
All customers will receive a tracking number once their check has shipped.
Once your check is shipped you will be able to follow your big check at ups.com with the tracking number provided in an e-mail. If you have not received a tracking number confirmation by 5:00pm on the day you expect to ship, then please contact us at firstname.lastname@example.org
We currently ship to Canada and the UK.
For all international transactions, the product shall be sold on a delivered, insurance paid, brokerage fee paid basis - duty, taxes, VAT, or any other charges to be paid by the purchaser. BlueWavePrinting & BigCheckStore.com assumes no responsibility for charges attendant to Customs clearance in the country of delivery, customs duty, VAT, or any other charges or taxes within the country designated for delivery by the purchaser. Title and risk of loss shall pass to the purchaser upon delivery to the port designated by the purchaser and prior to Customs clearance.
Risk of loss of the products shall remain with User after delivery of the goods to the User and during the return of any unwanted goods by User to BlueWavePrinting & BigCheckStore.com.